42
Others
Drive simulation
To check the searched route, you can carry out a
drive simulation. The icon for the current vehicle
position moves along the searched route indicat-
ing the contents of guidance that will be provided.
When the calculation of the route
has been completed, the display
shows the entire route on the map.
For details, see the searching for a
route on page 13.
While the entire route is being
displayed, press ENTER.
The point setting menu appears.
Select "Start" from the point setting
menu by tilting the joystick, then
press and hold ENTER for at least 5
seconds.
The drive simulation starts.
To stop the drive simulation, press
the RETURN button. The display
returns to the current vehicle
position screen.
1
2
3
4
To Next Page
Loading...
