Alpine NVE-N077PS - Editing the Avoid Areas; Deleting the Stored Avoid Points

37
EN
Deleting the stored avoid points Editing the avoid areas
You can change the names, locations, and the
area size of the stored avoid areas.
Press the MENU button to display
the main menu. Select "Memory
points" from the main menu by
tilting the joystick and press ENTER.
The Memory points screen appears.
Select "Edit" under "Area to avoid"
by tilting the joystick and press
ENTER.
The list of the stored avoid arears is
displayed. Select the avoid area to
be changed by tilting the joystick
and press ENTER.
The Edit area to avoid screen
appears.
• Name:
Select "Change" for "Name" and press
ENTER. The name input pallet appears.
Input the new name and select "OK" and
press ENTER.
• Location:
Select "Change" for "Location" and press
ENTER. The avoid area map appears.
Move the map to bring the reticule icon to
the point where you want to avoid by tilting
the joystick and press ENTER.
• Change area size:
Select this menu and press ENTER to
change the avoid area size. Select the
desired size by tilting the joystick and press
ENTER.
When the editing has been
completed, press the POS. button to
return to the current vehicle position
screen.
1
4
2
3
5
Press the MENU button to display
the main menu. Select "Memory
points" from the main menu by
tilting the joystick and press ENTER.
The Memory points screen appears.
Select "Delete" under "Area to
avoid" by tilting the joystick and
press ENTER.
The list of the stored avoid areas is
displayed. Select the avoid area to
be deleted by tilting the joystick and
press ENTER.
(If you want to delete all of the
stored avoid areas at the same time,
select "Del. all" by tilting the joystick
and press ENTER.)
The confirmation dialog message
appears. Select "Yes" by tilting the
joystick and press ENTER. The
selected avoid area(s) are deleted.
Press the POS. button to return to
the current vehicle position screen.
1
4
2
3
5