31
EN
Setting required (preferred)
roads for the route
Deleting destinations
This section describes how to delete an input
destination or all of the input destinations at the
same time.
Press the MENU button to display
the main menu. Select "Edit route"
from the main menu by tilting the
joystick and press ENTER.
The Edit route screen appears.
Select "Delete" under "Destination"
by tilting the joystick and press
ENTER.
The list of the Input destinations
appears. Select the destination you
want to delete by tilting the joystick
and press ENTER.
(If you want to delete all of the
destinations at the same time, select
"Del. All" by tilting the joystick and
press ENTER.)
Note:
If only one destination is set, the list will not
appear.
The confirmation dialog screen
appears. Select "Yes" by tilting the
joystick and press ENTER. The
selected destination (or all of the
destinations) will be deleted.
When the sequence of the
destinations has been changed,
select "OK" by tilting the joystick
and press ENTER.
1
2
3
4
5
1
4
2
3
5
Press the MENU button to display
the main menu. Select "Edit route"
from the main menu by tilting the
joystick and press ENTER.
The Edit route screen appears.
Select "Add" under "Set required
road" by tilting the joystick and
press ENTER.
The map showing the entire route
appears. Scroll the map and bring
the road to be edited under the
reticule icon by tilting the joystick
and press ENTER.
The confirmation screen appears. If
you prefer to use the road, select
"Enter" by tilting the joystick and
press ENTER. (If you want to change
to another type of road, select
"Next" to choose another road.)
The Add required road screen
appears. Select "Add" located at
where the required road should be
placed by tilting the joystick and
press ENTER.
Note:
If only one destination is set, the list will not
appear.
Note:
You can set 1 or 2 required roads.
When you have set the required
road, select "OK" by tilting the
joystick and press ENTER.
6
To Next Page
Loading...
