29
EN
Dual-screen display
6
• To display the set local POI icons, select
"Show POI icons" by tilting the joystick and
press ENTER.
• To change the map magnification range,
press the 4 or 3 button.
• If a wider-range map is being displayed, the
icons cannot be displayed. In this case,
change to a detailed map by pressing the 3
button.
When the settings have been
completed, press the POS. button to
return to the current vehicle position
map. Now, the system displays two
different screens.
The system can display two different screens
simultaneously for your convenience. For exam-
ple, a detailed map and a wide range map can be
displayed at the same time so that you can view a
detailed map around the present vehicle position
and a wide range map along the route.
Press the MENU button to display
the main menu. Select "Screen
config." from the main menu by
tilting the joystick and press ENTER.
The Map configuration screen
appears (see page 28). Select "Dual"
under "Map mode" by tilting the
joystick and press ENTER.
Note:
Pressing the
button switches to the dual-
screen display.
The System changes to dual-screen
mode and displays two screens
simultaneuusly. Press ENTER while
two screens are displayed.
The point setting menu appears. To
change display mode of the right
screen, select "Right screen" from
the point setting menu by tilting the
joystick and press ENTER.
The Edit right screen menu appears.
• To change the map orientation, select "Map
orient." menu by tilting the joystick and press
ENTER. Each pressing of ENTER toggles
between north-up and heading-up modes.
5
1
2
3
4
To Next Page
Loading...
