35
EN
c Location
The location of a memory point can be
moved.
H Go to c1 Location Change.
d Phone no.
Phone number can be added to a
registered point.
H See d1 Phone Number Change.
Icon Change
Select "Change" for "Icon" and
press ENTER.
The icon list appears. Select the
desired icon and press ENTER.
a1
a2
Name Change
Select "Change" for "Name" and
press ENTER.
The character input pallet is
displayed.
Select the desired characters one by
one and press ENTER each time you
select a character.
When character inputtings have
been completed, select "OK" and
press ENTER.
Note:
To show the name, select "On" and press
ENTER. If you do not want to show the name,
select "Off" and press ENTER.
b1
b2
b3
Backspace
Erases the
previous
character
Phone Number Change
Select "Change" for "Phone no."
and press ENTER.
The numeric input pallet is
displayed. Select the desired
numeral and press ENTER. Repeat
this procedure to complete the
editing.
When the new phone number has
been input, select "OK" and press
ENTER.
Tips:
Phone Number Editing:
You can search for a desired destination or
point of interest using the phone number that
is input or edited here. (See page 22.)
c1
c2
c3
Location Change
Select "Change" for "Location" and
press ENTER.
The location to be corrected is
indicated by the reticule icon. Tilt
the joystick and move the map to
the correct location.
Press ENTER.
d1
d2
d3
When the editing has been
completed, press the POS. button to
return to the current vehicle position
screen.
5
To Next Page
Loading...
