Alpine PXA-H510 - RCA Connection Adjustments

20
Basic Operation
English
1
2
MODE / SUB W.
VOL SUB W.FAD BAL
Using the RCA-type audio
inputs
Adjusting the volume,
fader, balance and sub-
woofer
When using the Ai-NET connection, adjust the
volume/balance/fader control from the head
unit. (Not allowed from the PXA-H510.) Adjust
the subwoofer control from the PXA-H510.
Press “MODE”.
Notes:
• The subwoofer cannot be adjusted when it is
turned off.
• There is no need to select the mode to
adjust the volume.
Within 5 seconds, use the “ ”, “ ” or “ ” , “ ”
key to adjust.
and : To adjust the volume, fader and
subwoofer
and : To adjust the balance