Alpine PXA-H510 - Page 60

60
Using Dolby Surround
English
Within 5 seconds, use the “ ” or “ ” key to
switch the mode.
Press “ ” to set the off mode.
Press “ ” to set the on mode.
Note: The off mode is set automatically when
the rear speakers are set to the off mode.
Within 5 seconds, use the “ ” or “ ” key to
adjust the level.
The level can be adjusted between –2 and +2.
The higher the value, the greater the bass
sound output from the rear speakers.
(The effect differs from source to source.)
To quit, press “A.PROC”.
Mixing the rear audio
channels (Continued)
4
5
R–MX ON
6
A.PROC
DEF.
R–MX 1