Altana BYK wave-scan 3 Short Instructions

wave scan 3 / wave scan 3 dual BYK-Gardner GmbH
10 301 200 083 - 2309
6 Measure
Take measurements which are automatically saved. The checking tile and a blank standard
are displayed for selection. Select an existing entry or create a new standard by clicking on
the Plus (+) symbol.
1
2
34
1 Checking tiles
For regular checks of the instrument.
See Configuration > Checking
tiles > Add to standard list.
2 Standards
Created with the Plus (+) symbol or
transferred from “smart-process”.
4 Filter
To filter for standards in case of very
long standard list.
3 Create new standard
To create additional standards in the
instrument memory.
The measurement procedure is the same as for Quick Check.
The results are saved in the instrument memory and can be transferred to “smart-process”.
To document the correct measurement status of your instrument you can measure the
checking tile in regular intervals. This monitors frequently the instrument performance.

Altana BYK wave-scan 3 Specifications

General

Brand	Altana
Model	BYK wave-scan 3
Category	Measuring Instruments
Language	English