Altana BYK wave-scan 3 - Introduction

BYK-Gardner GmbH wave scan 3 / wave scan 3 dual
301 200 083 - 2309 5
1 System Description
The entire system consists of instrument, docking station, checking tiles and software for
data transfer and analysis.
1. Connect docking station with power supply (1).
2. Place instrument in the docking station (2).
3. Docking station automatically charges battery pack
in docking station and in instrument.
4. Connect docking station with PC via USB cable (3).
5. Download and install “smart-chart” software (4).
6. Turn instrument on by pressing the Operate button.