Do you have a question about the Altera DE1 and is the answer not in the manual?
Total Logic Elements | 18, 752 |
---|---|
Embedded Multipliers | 52 |
Embedded Memory (RAM) | 239, 616 bits |
Oscillator | 50 MHz |
Switches | 10 toggle switches |
PLLs | 4 |
FPGA Device | Altera Cyclone II EP2C20F484C7 |
External Memory | 8 MB SDRAM, 512 KB SRAM, 4 MB Flash |
Configuration | JTAG |
Connectors | VGA, RS-232, PS/2, GPIO, Expansion Headers |
LEDs | 8 green LEDs |
Display | Four 7-segment displays |
Audio | 24-bit audio CODEC |
Power Supply | 5V DC input |
Lists items included in the DE1 package, such as the board, cables, and software media.
Details the physical layout, connectors, and key components of the DE1 board.
Presents a high-level block diagram of the DE1 board's architecture and connections.
Step-by-step instructions for powering on and verifying the DE1 board.
Instructions for setting up and running the DE1 Control Panel application.
Methods for configuring the FPGA using JTAG and AS programming modes.
How to use the pushbutton and toggle switches on the DE1 board.
Details on the Wolfson WM8731 audio CODEC and its interface.