4. INSTALLATION
Figure 58: Insertion of Nexto Jet Connector
4.2.4.3. I/O connector block removal for Nexto and Nexto Jet Modules
Nexto Series I/O modules have a feature to help the connector block removal, which is described below.
As described previously, to open the frontal cover, it’s necessary to pull it by its lower part. When the I/O connector block
must be removed, it’s necessary to execute the same opening movement besides pressing the connector block extraction lever
as shown on figure below. It’s important to keep the extraction lever pressed during the whole movement since the beginning.
55
To Next Page
Loading...