CUID400N | CUID400N | CONTROL UNIT CUID400N56
WARRANTY OBLIGATIONS
12. WARRANTY OBLIGATIONS
1. The operational capacity of the product is guaranteed only when the rules governing its
storage, transportation, adjustment and operation are followed; when installation and
maintenance (timely and due) is performed by an organisation, specialising in the sphere
of automation and authorised to perform installation and maintenance operations.
2. The warranty period is__________________and starts from the date of product delivery
tothe Customer or from the production date, when the delivery date is not known.
3. During the warranty period any defects, caused by the Manufacturer, are repaired by the
service department, providing warranty maintenance.
Note: the parts, replaced by the service department, performing the product repair, become the
department’s property.
4. Warranty is not applied in the following cases:
• violation of storage, transportation, operation and installation rules;
• installation, adjustment, repair, re-installation or modification of the product by persons,
not authorised to perform such works;
• damage of the product, resulting from unstable working of the power supply system
or non-compliance of the power supply system with the values, established by the
Manufacturer;
• damage of the product, caused by water penetration;
• force-majeure (fires, lightnings, floods, earthquakes and other natural calamities);
• damage of the product construction by the consumer and third parties;
• malfunctioning and defects, caused by the absence of scheduled maintenance and
inspection of the product;
• completed manual is not provided.
For questions about the service please contact the organization that carried out the installa-
tion of the equipment.
13. INFORMATION ABOUT CERTIFICATION
Copies of declarations of compliance you may nd at:
http://www.alutech-group.com/en/products/other/automatics/documents
To Next Page
Loading...
Need help?
General
