DUAL PULSE 125
STORED ENERGY RESISTANCE WELDING POWER SUPPLY
ii 990-270
Copyright © 2002, 2013, 2014, 2015 Amada Miyachi America
The engineering designs, drawings and data contained herein are the proprietary work of Amada
Miyachi America and may not be reproduced, copied, exhibited or otherwise used without the
written authorization of Amada Miyachi America.
Printed in the United States of America.
Revision Record
Revision EO Date Basis of Revision
A 16610 4/96 Correct schedule save instructions
B 16841 9/96 Correct power supply output voltages for calibration procedure
C 17831 3/99 Complete revision of Calibration Procedures (Paragraph 8.03)
D 18576 11/99
Add tolerance to pulse output voltage.
Add Letter of Conformity.
E 19146 10/01 Complete Update
F 42762 8/13 Updated technical information and calibration values.
G 42840 11/13 Update to Miyachi America name and logo.
H 43479 12/14 Update to Amada Miyachi America name and logo.
J 43808 7/15 Update to Amada format.
To Next Page
Loading...