Need help?Do you have a question about the Amada 125DP and is the answer not in the manual?
Details changing energy levels, dual pulse settings, squeeze time, and schedule protection.
Guides on programming, saving, copying, and managing weld schedules and power-up settings.
Explains basic parameters: heat, time, pressure, and their controlling factors.
Outlines making sample welds, evaluating results, and adjusting parameters like electrode force.
Discusses electrode face area, 125DP parameters, dual pulse operation, and making/evaluating welds.
Covers evaluating welds, weak welds, electrode sticking, and causes of imperfect welds.
Lists common issues, diagnostic steps, and options for telephone and factory repair services.
Details changing energy levels, dual pulse settings, squeeze time, and schedule protection.
Guides on programming, saving, copying, and managing weld schedules and power-up settings.
Explains basic parameters: heat, time, pressure, and their controlling factors.
Outlines making sample welds, evaluating results, and adjusting parameters like electrode force.
Discusses electrode face area, 125DP parameters, dual pulse operation, and making/evaluating welds.
Covers evaluating welds, weak welds, electrode sticking, and causes of imperfect welds.
Lists common issues, diagnostic steps, and options for telephone and factory repair services.
General| Output Power | 125W |
|---|---|
| Input Voltage | 100-240VAC |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +85°C |
| Protection Features | Overvoltage Protection, Short Circuit Protection |
To Next Page