DUAL PULSE 125
STORED ENERGY RESISTANCE WELDING POWER SUPPLY
990-270 iii
FOREWORD
Thank you for purchasing a Miyachi Unitek Dual Pulse 125 Stored Energy Resistance Welding
Power Supply.
Upon receipt of your equipment, please thoroughly inspect it for shipping damage prior to its
installation. Should there be any damage, please immediately contact the shipping company to file a
claim, and notify us at:
Amada Miyachi America
1820 South Myrtle Ave.
Monrovia, California 91017-7135
Phone: (626) 303-5676
FAX: (626) 358-8048
E-mail: info@amadamiyachi.com
The purpose of this manual is to supply operating and maintenance personnel with the information
needed to properly and safely operate and maintain the Dual Pulse 125 Stored Energy Resistance
Welding Power Supply.
We have made every effort to ensure that the information in this manual is accurate and adequate.
Should questions arise, or if you have suggestions for improvement of this manual, please contact us at
the above location/numbers.
Amada Miyachi America is not responsible for any loss due to improper use of this product.
To Next Page
Loading...