Amano CP-3000 - Signal 1 Test; Color Change Test

CP-3000 User’s Guide 6-15
Step 4. Press the YES key to stop the test. A
beep will sound and the test number will
flash in the display.
Step 5. Press the NO key to move to the next test
or exit the Diagnostics menu by pressing
the FUNCTION key, or by exiting the
Program Mode.
Signal 1 Test
Step 1. If you have not already done so, enter
theProgram Mode and press the
FUNCTION key until the LED Test menu
item appears in the display.
Step 2. Press the NO key six times. The Signal 1
Test menu item will appear in the display.
Step 3. Press the YES key to select and start the
test. The test number will cease to flash in
the display and you will hear a clicking
sound as the relay contacts open and
close.
Step 4. Press the YES key to stop the test. A
beep will sound and the test number will
flash in the display.
Step 5. Press the NO key twice to move to the
next test or exit the Diagnostics menu by
pressing the FUNCTION key, or by exiting
the Program Mode.
Color Change Test
Step 1. If you have not already done so, enter
theProgram Mode and press the
FUNCTION key until the LED Test menu
item appears in the display.
Step 2. Press the NO key eight times. The Color
Change Test menu item will appear in the
display.