Need help?Do you have a question about the Ametek AMREL SPS Series and is the answer not in the manual?
General| Type | Programmable DC Power Supply |
|---|---|
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Cooling | Forced Air |
| Output Voltage | Up to 600V (depending on model) |
| Control Interface | RS232, USB, GPIB, Ethernet |
| Programming Accuracy | ±0.05% |
| Readback Accuracy | ±0.05% |
| Humidity | 5% to 95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
Procedure for requesting an RMA and returning defective products for warranty service.
Overview of the AMREL Medium Power SPS Series DC Power Supplies and their capabilities.
Details on the advanced features, options, and design considerations of the SPS series.
Comprehensive overview of environmental, electrical, and physical parameters for the power supplies.
Specifies operating conditions, temperature, humidity, altitude, input power, and electrical parameters.
Covers programming, sensing, control, dimensions, and weight specifications for the power supplies.
Details how to set voltage, current, overvoltage, and overcurrent levels using the keypad.
Describes how to activate or deactivate output, VLIST, OVP, and OCP using the keypad.
Explains how to view SPS identification and firmware information using the keypad.
To Next Page