Specications | 2-1
SPECIFICATIONS
The Heated Acid Gas (HAG) Probe is designed for applications in which
process gas is to be returned to the process pipe, where the process gas
contains only small quantities of particulate and entrained liquids.
Probe Heater
The Heater Assembly is the only part of the Sample Probe that is electri-
cally powered.
Power Consumption
Maximum Power: 150 W
Electrical Requirements
Supply Voltage: 120 VAC ± 10 %, 47–63 Hz
240 VAC ± 10 %, 47–63 Hz
Approvals and Certications
CSA: Class I, Division 1, Groups B, C, D;
Ex d IIB + H
2
T3 (Class I, Zone 1, Group IIB + H
2
)
General Safety Requirements
CSA and UL Standards.
ATEX: DEKRA Certificate No.:
KEMA 01ATEX2177 X;
II 2 G Ex db IIB+H
2
T3 Gb or
II 2 G Ex db IIB+H
2
T3
To Next Page
Loading...
Need help?
General
