Ametek HAG User Manual

Service and Parts | 5-3
Recommended Spare Parts
To avoid lengthy maintenance delays, be sure to have on-site all parts
that are being replaced prior to disassembling the HAG Probe valve
assembly.
Content is subject to change without notice.
The “Drawing No.” in parentheses below the “Part No.” in these spare
parts lists indicates the drawing to refer to in Chapter 6 for the location of
the part in the analyzer.
Preventive Maintenance Spare Parts
HAG Sample Probe
Part No.
(Drawing No.) Description
1 Year
QTY
2 Year
QTY
301-1713
(100-2196)
Sintered Disk, 52 mm diameter
(HAG Sample Probe)
4 8
301-1714
(100-2196)
Hi-Flow Filter Membrane, c/w Buna O-Ring
(HAG Sample Probe)
4 8
300-8722
(100-2196)
O-Ring, Aas, size 118
(HAG Sample Probe)
4 8
300-8719
(100-2196)
O-Ring, Aas, size 121
(Valve Cover, HAG Sample Probe)
8 16
300-4651
(100-2196)
O-Ring, Silicone, 2-014
(Aspirator Insert, HAG Sample Probe)
4 8
300-4958
(100-2194 and
*100-2196)
O-ring, Viton, size 008
(Fiber Filter Assembly, HAG Sample Probe)
4 8
100-2193
(100-2194 and
*100-2196)
Fiber Filter Element
(Fiber Filter Assembly, HAG Sample Probe)
4 8
300-6242
(100-2194 and
*100-2196)
O-Ring, Aas, size 115
(Fiber Filter Assembly, HAG Sample Probe)
4 8
* Refer to drawing 100-2196 for the location of Fiber Filter Assembly in the Sample Probe and drawing
100-2194 for the Fiber Filter Assembly.

NOTE

Ametek HAG Specifications

General

Brand	Ametek
Model	HAG
Category	Measuring Instruments
Language	English