Contents | xi
EU Declaration of Conformity
PN 903-8612 Rev J
EU Declaration of Conformity
Manufacturer’s Name: AMETEK Canada
A Division of AMETEK Process & Analytical Instruments
(ISO 9001:2008 Registered)
Manufacturer’s Address: 2876 Sunridge Way N.E.
Calgary, Alberta, Canada T1Y 7H9
Phone: (403) 235-8400 / Fax: (403) 248-3550
EU Representative Address: AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Str. 16
D-40670 Meerbusch, Germany
Phone: 49-2159 91 36 0 / Fax: 49-2159 91 36 80
Declare under our sole responsibility that the product:
Product Name: Heater Assembly and Heated Acid Gas Probe
Marking: II 2 G Ex db IIB + H
2
T3 Gb or
II 2 G Ex db IIB + H
2
T3
Conforms to the following EU Standards and Directives:
Restriction of Hazardous Substances Directive 2011/65/EU (RoHS 2).
Low Voltage Directive 2014/35/EU using the following standards:
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1. General requirements.
Pressure Equipment Directive 2014/68/EU using:
Article 4, Paragraph 3
Canadian Registration Number:
0H06030.235 (High Temperature Probe only)
(Alberta Boilers Safety Association)
ASME Boiler and Pressure Vessel Code 1998, Section VIII, Division 1
The object of the declaration described [herein] is in conformity with the relevant Union harmonization
legislation (Directive 2014/34/EU):
EN 60079-0:2012 + A11:2013 General requirements
EN 60079-1:2014 Flameproof Enclosures ‘d’
CerticateNumber: KEMA01ATEX2177X
NotiedBody: DEKRACerticationB.V.0344
Meander 1051, 6825 MJ Arnhem
The Netherlands
____________________________
Randy Meads
Quality Assurance Manager
Calgary, Alberta, Canada
June 28, 2017
Canada
A DIVISION OF AMETEK PROCESS & ANALYTICAL INSTRUMENTS
Western Research
To Next Page
Loading...
Need help?
General
