2-10 | Heated Acid Gas Sample Probe (Large Diameter)
The Probe Heater Assembly is the only part of the Sample Probe that is
electrically powered. A Probe Heater Assembly with CSA, ATEX, or IECEx
certification is marked with the label shown below.
DANGER:
Ne pas ouvrir si une atmosphère
gazeuse explosive peut être
présente.
Do not open when an explosive
gas atmosphere is present.
Heat resistant cable & 1/2"
NPT Ex d cable glands shall
be used, suitable for 85°C.
Certificate No: KEMA 01ATEX2177 X
__120 __240 Vac, 47-63 Hz, 150W
CL. I, GRP. B,C,D; CL. I, ZONE 1
To Next Page
Loading...
Need help?
General
