Installation and Start-Up | 3-11
INSULATED TO AVOID PLUGGING.
CONNECTION TO THE PROCESS PIPE BE STEAM TRACED AND
AMETEK RECOMMENDS THAT ALL NOZZLES FROM THE PROBE NOTE:
TOP VIEW OF HORIZONTAL DUCT
SIDE VIEW OF VERTICAL DUCT
ORIENTATION OF PROBE IS NOT CRITICAL
FOR HORIZONTAL MOUNTING, USER
ORIENTATION OF PROBE IS CRITICAL
MUST BE ANGLED DOWNWARD SLIGHTLY.
FOR VERTICAL MOUNTING, VENT VALVE
SECTION THROUGH HORIZONTAL DUCT
Figure 3-2.
HAG Probe Installation
Details (example).
To Next Page
Loading...
