6)
The next dialog box requires you to Select the Scale to measure.
Choose one of the Primary Scales listed on
the left by
highlighting it with the mouse.
If you would like the test result automatically converted to another scale,
Click on the “Calculate Converted Scale”. Then highlight
one of the Converted Scales listed on the right.
The
scale abbreviations
which are listed
H
BW - Brinell Scale
DIA - Diameter Measurement of
impression
INCH = Measurement in Inches
for linear measurement
MM
=
Measurement
in
Millimeters
for linear measurement
PIN – Scale for measurement for
impressions made with a Newage Pin Brinell tester
Converted Scales
HRC - Rockwell C scale
HV = Vickers Scale
HK = Knoop Scale
HRB = Rockwell B scale
HRA
=
Rockwell
A
scale
HR15N, 30N, 45N = Rockwell N scales
HR15T, 30T, 45T = Rockwell T scales
HRD = Rockwell D scale
HRE
=
Rockwell
E
scales
NOTE:
The scale cannot be changed for a data file that contains test results.
The operator will be prompted to
change files if he tries to change scales with data in the file
To Next Page
Loading...
