931003E / 0620 3. SPECIFICATIONS
0 29 Software-selectable DPM address (SET_DPM_ADDR)
0 30 Multiple devices (e.g., 919)
1 31 Software-selectable ADC gate mode (SET_GATE...)
0 32 Software-downloadable firmware
0 33 Time histogramming functions available (e.g., 9308)
1 34 Software-selectable lower level discriminator
1 35 Software-selectable upper level discriminator
0 36 MCS-mode SCA input available
0 37 MCS-mode positive TTL input available
0 38 MCS-mode fast-negative NIM input available
0 39 MCS-mode discriminator input available
0 40 Software-switchable MCS-mode discriminator edge
0 41 Software-programmable MCS-mode discriminator level
0 42 Software-programmable SCA upper and lower thresholds
0 43 Software-selectable MCS-mode input sources
0 44 Uncertainty/statistical preset (SET_UNCERT_PRES)
0 45 Features vary by input (SHOW_FEATURES depends on device/segment;multi-input
MCBs only)
0 46 Software-selectable HV shutdown mode (SET/SHOW/VERI_SHUT)
1 47 Software-selectable shaping time constants (SET_SHAP)
1 48 Explorable shaping time constants (SHOW_CONFIG_SHAP)
0 49 Advanced shaping time (SET_SHAP_RISE, SET_SHAPE_FLAT, etc.)
0 50 Software-selectable BLR (ENA/DIS/SHO_BLR_AUTO SET/SHO/VERI_BLR)
1 51 SHOW_STATUS command supported (returns $M record)
0 52 Overflow preset (ENA/DIS/SHO_OVER_PRES)
0 53 Software-enabled, MicroNOMAD-style audio clicker (ENA/DIS_CLICK)
0 54 Software-readable thermistor (SHOW_THERM)
1 55 Floating-point fine gain (SET/SHO/VERI/LIST_GAIN_FINE)
0 56 Software-enabled pileup rejector. (ENA/DIS/SHO_PUR, SET/VERI_WIDT_REJ)
0 57 Alpha-style HV power (SHOW_HV_CURRENT)
0 58 Software-readable vacuum (SHOW_VACUUM)
0 59 Acquisition alarms (ENA/DIS/SHO_ALARM)
0 60 Hardware acquisition trigger (ENA/DIS/SHO_TRIG)
1 61 Ordinal numbers for shaping times (SET_SHAP 0, SET_SHAP 1, ...)
1 62 Query gain ranges (LIST/VERI_GAIN_FINE, ..._COAR, ..._CONV)
0 63 Routable inputs (SET/SHOW_INPUT_ROUTE)
23
To Next Page
Loading...
