digiBASE
®
PMT Base with Integrated Bias Supply, Preamplifier and Digital Multichannel Analyzer 931003E / 0620
0 64 External dwell support (ENA/DIS_DWELL_EXT)
0 65 Selectable SUM or REPLACE MCS modes (ENA/DIS_SUM)
0 66 External start of pass support (ENA/DIS/SHO_START_EXT)
0 67 Explorable with MCS list commands (LIST_SOURCE, LIST_LLSCA,
LIST_ULSCA)
0 68 Device supports the MDA preset
0 69 Software-selectable ADC type (Matchmaker)
0 70 Has ability to daisy-chain MCBs (DART)
0 71 ZDT functions available (DSPEC Plus)
1 72 DSPEC Plus-style Insight triggering (LIST/SET_TRIG_SAMP)
0 73 Multiple inputs per connection (for example, OCTÊTE Plus)
0 74 Hardware count-rate meter (SH_CRM)
0 75 Has multiple ZDT modes (SET/SHOW/LIST_MODE_ZDT)
0 76 Has multi-nuclide MDA preset
0 77 Has MCS Replace then Sum Mode (SET_RPLSUM)
0 78 Has programmable external dwell voltage capability
0 79 No Peak Preset feature (M
3
CA and OASIS)
0 80 Programmable pulser (OASIS)
0 81 Programmable Vacuum/HV interlock (OASIS)
0 82 Programmable Current/HV interlock (OASIS) 0
1 83 Explorable Stabilizer (LIST_GAIN_ADJU, LIST_ZERO_ADJU)
0 84 Has programmable input impedance (MCS)
1 85 Advanced shaping-time feature has no CUSP (digiDART, DSPEC jr)
0 86 Selectable HV rise-time (SET/SHOW/LIST_HV_RISE) (SBS-60)
1 87 Explorable ADC_GATE settings (LIST_GATE, SET_GATE n)
1 88 Monitor command support (SHOW_MONI_MAX/LABEL/VALUE)
0 89 SMART-1 Detector support (SHOW_SMART_DET, SHOW_SNUM_DET,
SHOW_HV_RECO)
0 90 Nuclide report (SET/SHOW_NUCL_COEF, SET/ SHOW_ROI_NUCL, ...)
0 91 Interactive Display Features Such as Nuclide Report
0 92 Advanced Stored Spectra (SH_SPEC_COUNT, SET/SHOW_SPEC_ID, MOVE)
0 93 SET/SHOW/LIST_VIEW in new ZDT and GATE routing MCBs with DPM or
RS-232
0 94 Connected to MCB via RS-232 (slow) port
1 95 No SET_HV_POSI, SET_HV_NEGA, ENA_NAI, DISA_NAI
24
To Next Page
Loading...
Need help?
General
