Ametek Reichert XCEL 255 - Guidance Tables; Electromagnetic Emissions Declaration

19
15120-101 Rev. D
Table 201 – Guidance and Manufacturer’s Declaration
Electromagnetic Emissions
All Equipment and Systems
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
TheXcel255isintendedforuseintheelectromagneticenvironmentspeciedbelow.Thecus-
tomer or user of the Xcel 255 should ensure that it is used in such an environment.
Emissions Test Compliance
Electromagnetic Environment
- Guidance -
RF Emissions
CISPR 11
Group 1
Class B
The Xcel 255
uses RF energy only for its internal func-
tion. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
Harmonics
IEC 61000-3-2
Class A
The Xcel 255
is suitable for use in all establishments,
including domestic, and those directly connected to the
public low-voltage power network that supplies build-
ings used for domestic purposes.
Flicker
IEC 61000-3-3
Complies
Guidance Tables