Ametek SPECTRO ARCOS FHX3X

Layout of the instrument
— 20 SPECTRO ARCOS FHX3X — 08.02.2022
3.7 Plasma torch box
In systems with axial plasma observation (Multiview EOP), the plasma torch in the
torch box housing is in a horizontal position, and in systems with radial plasma
observation (SOP/DSOI/Multiview-SOP/MultiView-DSOI), the plasma torch is in
the vertical position.
When using instruments with Multiview (optional), the plasma torch can be
installed horizontally (EOP) or vertically (SOP/DSOI), depending on the Multiview
setting.
Plasma torch box SOP
Fig. 7
No. Component No. Component
1 Extraction box housing and torch 6 Clamp
2 Load coil 7
Connection to sample introduction
system
3 Plasma torch 8 Plasma torch bracket
4 Nebulizer gas connection 9 Plasma interface (SPI)
5 Spherical joint seal