Ametek SPECTRO ARCOS FHX3X - Page 42

Maintenance
— 42 SPECTRO ARCOS FHX3X — 08.02.2022
5. Disassemble the plasma torch.
 Loosen the clamping screw
(1).
 If necessary, use a
screwdriver or another
suitable tool to loosen the
clamping ring (2).
 Pull the torch (3) slightly out
of the adapter
 Remove the hoses (A, C).
 Pull the torch out of the
adapter.
Fig. 13
6. Careful not to touch the sensor
mirror in the torch adapter (1).
Fig. 14