20
English
Right angle pick-up - Code PK-05
• For measurement at right angles to the direction of traverse.
Recess pick-up
• For measuring into deep recesses.
• Code PK-06 recess 5.7 mm (0.23 in) with 5µm tip radius
• Code PK-08 recess 25 mm (0.23 in) with 5µm tip radius
(Other depths and tip radii available)
Chisel edge pick-up - Code PK-24
• For measuring along sharp edges or wire. Not for use on flat
surfaces.
60.8
62.9
60.6
To Next Page
Loading...
