53
English
Power Saving
Sleep timer
Power Saving settings control how long the unit display should stay on.
Settings can be made in ‘Battery’ mode, when the unit is not charging
or ‘Changing’ mode when the unit is plugged in. The unit can be set
to go to sleep from a minimum of 30 seconds up to a maximum of 6
hours in pre-set increments. Another option is to select ‘Never’ if the
sleep timer feature is not desired.
Battery
1. Tap ‘advanced’ then ‘power saving’ and then ‘sleep timer’.
2. Select ‘Battery’ and set a time as the battery sleep timer. Click on
the Up/Down arrows to increase or decrease the timing.
Charging
1. Tap ‘Advanced’ then ‘Power Saving’ and then ‘Sleep Timer’.
2. Select ‘Charging’ and set a time as the charging sleep timer. Click
on the Up/Down arrows to increase or decrease the timing.
To Next Page
Loading...
