Ametek TAYLOR HOBSON Surtronic S-100 Series - Rmr Offset and Meanline Adjustment; Adjusting Rmr Offset; Configuring Meanline Settings

41
English
Rmr settings – ‘Mr%’ (offset)
1. Tap ‘Mr%’ and then the ‘offset’ box to adjust the setting.
2. Tap ‘+/-’ icon to toggle between positive and negative. Tap Up/
Down arrows to change the number in the offset box.
Rmr settings – ‘Meanline’
• Tap ‘Meanline’ to adjust the setting.
• Tap ‘+/-’ icon to select between positive and negative. Tap Up/
Down arrows to change the number in the offset box.