Versitron Operation Manual 43
5.23 Setup Screen
The Setup Screen provides access to the functions required for selecting test
parameters. Many of these parameters are optional. The test machine should
always start up ready to test using the most recently set configuration (if
applicable). From the Setup Screen, the user is allowed to enter a New
configuration test, Select, Edit, Rename or Delete an existing configuration.
The Advanced button allows the user to access further functions and settings.
Selecting New, allows the user to set the file Name, Hardness Scale, Time at
Load, High and/or Low Tolerance, Scale Conversion and Roundness
correction, for their test configuration.
To Next Page
Loading...
