66 Versitron Operation Manual
7.8 Standard Accessories
These accessories and parts are included in the accessory kit provided with each test
head.
(1) Diamond indenter for Regular or Superficial scale (normally installed on test
head, not in kit).
(1) 1/16” ball indenter
(2) Test blocks
(1) Calibration lock
(2) Pin wrenches
(1) USB Device Driver install CD (for connection to external PC)
These accessories and parts are included with each test stand.
BT130N (1) Clamping shield; (1) set of Allen wrenches, (1 each) 2” flat, spot, shallow
and wide Vee anvil; (1) accessory case; (1) vinyl protective cover.
BT130T, (1) Removable anvil stage; (1) anvil stage wrench; (1) clamping shield; (1)
spindle lock; (1) set of Allen wrenches (1 each) 2” flat, spot, shallow and wide Vee
anvils; (1) anvil base adapter; (1) accessory case; (1) vinyl protective cover.
AT130-MT2 Automatic assemblies include the same accessories as the Standard
Versitron.
7.9 Options and Other Accessories
(See following pages for drawings of indenter shrouds and clamping shields)
These accessories may be purchased for special applications. See following pages for
illustrations
Newage Part Number Description
AT/5116W 1/16” Carbide Ball
AT/5117W 1/8” Carbide Ball
AT/5121W 1/4” Carbide Ball
AT/5118 Cap only for 1/16’ ball indenter
AT/5119 Cap only for 1/8” ball indenter
AT/5309 Diamond spot anvil
AT/5310 Two inch spot anvil
AT/5311 Spot anvil
AT/5312 Shallow Vee anvil
AT/5313 Wide Vee anvil
AT/5316 Large taper testing anvil
AT/5318 Small anvil with reducer
AT/5319 Flattened ball anvil, for tapered faces
AT/5320 Clamping shield, fits all stands
To Next Page
Loading...
