AMI 420 - Page 86

68 Rev. 7
Remote Interface Reference
SCPI Command Summary
(see page page 85 for more information)
CONFigure:VOLTage:LIMit <voltage>
CONFigure:CURRent:PROGram <current>
CONFigure:FIELD:PROGram <field (kG, T)>
CONFigure:RAMP:RATE:CURRent <rate (A/s, A/min)>
CONFigure:RAMP:RATE:FIELD <rate (kG/s, kG/min, T/s, T/min)>
CONFigure:RAMP:CURRent
<current>,<rate (A/s, A/min)>
CONFigure:RAMP:FIELD <field (kG, T)>,<rate (kG/s, kG/min, T/s, T/min)>
VOLTage:LIMit?
CURRent:PROGram?
FIELD:PROGram?
RAMP:RATE:CURRent?
RAMP:RATE:FIELD?
RAMP:CURRent?
RAMP:FIELD?
VOLTage:MAGnet?
VOLTage:SUPPly?
CURRent:MAGnet?
FIELD:MAGnet?
(see page 87 for more information)
RAMP
PAUSE
UP
DOWN
ZERO
STATE?
Ramp Configuration Commands and Queries
Ramping State Commands and Queries