To Next Page
A
April RodriguezAug 19, 2025
Why is my Ampac Control Panel system on batteries?
- JJack HayesAug 19, 2025
If your Ampac Control Panel is running on batteries, it could be due to several reasons. First, check if the mains at the distribution board are off. If they are, turn the power on and check for the main on indicator when power is returned. Another cause could be a mains power failure. Also, ensure the mains switch is turned on. Finally, a blown mains fuse could be the culprit; in this case, replace the fuse.
General
