Ampac EV3000 Commissioning Log Book

20
EV3000 COMMISSIONING LOG BOOK
12.5 E5 Half Yearly Report Form
Yes No
1. Is the installation damage free?
2. Does the installation match the original records?
3. Does the alarm system activate an alert at each ECP?
4. Does the automatic evacuation sequence fully function?
5. Does each zone at each ECP activate when the keyswitch is in 'manual'?
6. Is the EIS operational at each ECP?
7. Do all the audible and visual indicators work at each ECP?
8. Is the battery float charge voltage and current within the specified tolerances?
9. Is the battery electrolyte level O.K.?
10. Is the battery damage free?
11. When full load tested do batteries meet 95% nominal voltage?
12. Is battery charger current within limits?
13. Are the audio levels sufficient/correct?
14. Do the visual operate correctly, with frequency between 60 and 120 flashes per minute?
15. Battery capacity test performed?
16. Battery discharge current ........Amps
17. Battery discharge period .....Minutes
18. Battery capacity test passed?
REMARKS:...........................................................................................................................................
SYSTEM INSPECTED BY: DATE :
(Company)
WITNESS:
(Representative) (Owner)
IS ANY PART OF THE SYSTEM DISCONNECTED, BRIDGED OR REMOVED?
WHY :.......................................................................AUTHORISED BY :
WHAT FAULTS NEED REPAIRING
REPAIRED BY:........................................................DATE:
(Company)
(Representative)

Ampac EV3000 Specifications

General

Brand	Ampac
Model	EV3000
Category	Control Panel
Language	English