EV3000
COMMISSIONING LOG BOOK
Final Checks
1. Press the Lamp Test switch at each Emergency Control Panel (Ref Fig 1
Page 7 Master Control Panel Layout). For a period of 6 seconds the buzzer will sound
intermittently and all indicators will illuminate and flash, except system on batteries, charger
fault, battery fault, battery isolate and power on.
2. Check each Emergency Control Panel that the keyswitch is in 'Auto' and all other switches
are off.
3. Check the electrolyte level of the batteries if applicable.
4. Check the batteries for any damage.
5. Record all faults and relevant comments in the space provided.
6. Date and sign the report.
7. Contact the service agents if any faults need to be attended to.
8. Record date when outstanding faults are rectified.
To Next Page
Loading...
