Ampac LoopSense MAN 1572-4 User Manual

Page 12
LOOPSENSE EN54 USER MANUAL
4.4 Pre-Alarm Condition
When a Pre-Alarm event occurs, the following actions take place.
 The associated LED will operate
 The condition will be reported on the LCD.
 The event will be logged and printed, where a printer is fitted.
 All outputs configured to operate under this condition will operate
<point location> PRE-ALARM
<point descriptor> <type>
<date> <time> CONTROL*
PRE-ALARM XXX OF XXX ◄ZONE
4.5 Emergency Condition
When an Emergency event occurs, the following actions take place.
 The condition will be reported on the LCD.
 The event will be logged and printed, where a printer is fitted.
 All outputs configured to operate under this condition will operate
<point location> EMERGENCY
<point descriptor> <type>
<date> <time> CONTROL*
EMERGENCY XXX OF XXX ◄ZONE
4.6 Security Condition
When a Security event occurs, the following actions take place.
 The condition will be reported on the LCD.
 The event will be logged and printed, where a printer is fitted.
 All outputs configured to operate under this condition will operate
<point location> SECURITY
<point descriptor> <type>
<date> <time> CONTROL*
SECURITY XXX OF XXX ◄ZONE
4.7 User Condition
When a User event occurs, the following actions take place.
 The condition will be reported on the LCD.
 The event will be logged and printed, where a printer is fitted.
 All outputs configured to operate under this condition will operate
<point location> USER
<point descriptor> <type>
<date> <time> CONTROL*
USER XXX OF XXX ◄ZONE

Ampac LoopSense MAN 1572-4 Specifications

General

Brand	Ampac
Model	LoopSense MAN 1572-4
Category	Control Panel
Language	English