Amprobe Europe GmbH AT-2000
- 4 -
The AT-2000 Advanced Tracing System combines both Current Tracing
and Open Tracing into one versatile tool providing the ability to solve
virtually all your tracing problems.
Having confidence in an instrument is an important part of using the
instrument. All applications are different and special. An understanding of
the system's operation could be the difference between several minutes
or several hours on the job.
Invest time learning the operation of the Advanced Tracer to build
confidence in the unit. Please read this manual carefully. Take the time
to learn how the instrument operates. Test it in a variety of situations.
You will soon have the confidence to use it on a daily basis to solve
problems which were previously unsolvable.
AT-2000 SERIES PRODUCT DESCRIPTION
The AT-2000 System consists of different, yet fully compatible com-
ponents that are combined into four interchangeable systems:
AT-2001 Commercial Circuit Tracer- includes R2000 Receiver and
S2300 Load Signal Generator (9-300 volts AC or DC).
AT-2002 Industrial Circuit Tracer- includes R2000 Receiver and S2600
Load Signal Generator (9-600 volts AC or DC).
AT-2003 Commercial Open Tracer- includes R2000 and T2200
Transmitter.
AT-2004 Industrial Multipurpose Tracer- includes R2000, S2300, and
T2200 Transmitter.
AT-2005 Industrial Multipurpose Tracer- includes R2000, S2600 and
T2200 Transmitter.
All above tracer are delivered in the carrying case CA-200. Available is
also the lange case CC-2000 for the Clamp-On Accessory A-2201, the
B2024 Battery Booster and B2025 Recharger
Accessory:
• B2024 Battery Booster
• B2025 Recharger
• A-2201 Inductive clamp
• ATGC-1 Ground Coil
• CC-2000 Carrying Case large
To Next Page
Loading...