EasyManua.ls Logo

Amprobe AT-2001 - Specifications

Amprobe AT-2001
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Amprobe Europe GmbH AT-2000
- 22 -
SPECIFICATIONS
General
Operating Temperature: 0 to 120° F (-18°C to 49°C)
Storage Temperature: -40 to 150° F (-40°C to 66°C)
Case Material: ABS
Case Size: 11"x15"1/2" x 4" (39.4 x 27.9 x 10.2 cm)
R2000 Receiver
Detectors: Electromagnetic coil pickup for short mode.
Electrostatic plate pickup for open mode.
Sensitivity Selection: x1, x10, x100 course gain adjustment;
0-10 fine adjustment.
Short Mode performance: Over 20 feet in air under test conditions
Open Mode Performance: Over 12 feet in air under test conditions
60Hz Rejection: 120db
Power Source: 9V alkaline battery
Display: 10 LED's with chroma filter lens
Case: Flame retardant ABS 911
Weight: 6.2 oz (176grms)
S2300 Load Signal Generator
Operating Voltage: 9-300 volts AC or DC
Operating frequency: 32.768 KHz
Duty Cycle: Transmits 2 pulses with a duration of 0.0625 each every
0.5 seconds
Current Output-
Low Mode: 35mA peak, 4mA average
HIGH Mode: 70mA peak, 6mA average
Fuse: Fast acting 250mA @ 380V (6mm x 32mm)
Cat. No. 380.25-6x32
Case: Flame retardant ABS 911
Weight: 3.7 oz (105 grams)

Related product manuals