Now replace all the lines by typing in:
5 env 1,100,2,2
10 ent 1,100,-2,2
20 sound 1,284,200,1,1,1
run
Try some more variations for yourself.
NOISE
Noise can be added to the end of the sound command. A range of noise is available in the range 1 to
31. Try this by adding the noise number at the end of the sound command still using the envelope
command.
Replace lines 5 and 20 by typing in:
5 env 1,100,3,1
20 sound 1,200,100,1,1,1,5
run
Again, try to get some unusual sounds by modifying the volume envelope and the sound command,
with and without noise.
To Next Page
Loading...
