AmTryke 1416 - Page 30

To Next Page

To Previous Page

To install the 3-speed shift mechanism, follow the steps below:

1. Insert the shifter pin into the rear

hub.

2. Slide the shift mechanism over the

hub bolt and firmly hold in place

while tightening the set screw with a

5 mm Allen wrench.

Step 1

Combination shift control and hand

brake lever

Shifter pin

NOTE: The hand brake lever can be removed from the shift control and

mounted on the handlebar.

Shifter

Set screw

TOOLS REQUIRED:

• 5 mm Allen wrench

Hub bolt

Other manuals for AmTryke 1416