28
Customer Service 1 626 968 6860
Audio Connection
Always:
1.
Be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
2. Make sure to turn off the receiver before you connect or disconnect the
DVD player s power cord. If you leave the receiver power on, the speak
ers may be damaged.
3. The output sound of the DVD player has a wide dynamic range. Be sure
to adjust the receiver s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
4. Refer to the instructions supplied with the TV or video display device to
be connected.
To Next Page
Loading...