To Next Page

To Previous Page

Upgrading Firmware

Modero S Series Touch Panels - Installation & Hardware Reference Manual

c. Under Targ et, enter the Device number for the target touch panel in the Device field.

Use the Online Tree to determine the device's assigned ID (as well as the current firmware version).

Note that if this dialog was accessed by right-clicking on the touch panel in the Online Tree, the Device Number should

already be set correctly.

d. Verify that the Reboot Device option is selected. It is necessary to reboot the panel after a firmware upgrade.

3. Click Send to begin the file transfer.

4. The progress of the transfer operation is indicated in the Progress bars in this dialog, as well as on the panel itself.

5. When the transfer is finished, and the reboot is complete, press the Close button.

NOTE: If for any reason your Kit file transfer should fail, continue to retry the transfer until you are successful. DO NOT reboot the

Master, or change connections until the transfer is complete. Failure to complete this operation successfully may result in a factory

repair of the Master.

Other manuals for AMX MST-1001

Questions and Answers:

Need help?

Do you have a question about the AMX MST-1001 and is the answer not in the manual?

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	10 \
Touchscreen type	Tabletop
Display brightness	350 cd/m²
Display resolution	1280 x 800 pixels
Display technology	LED
Touchscreen technology	Resistive
Viewable size diagonal	256 mm
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Product color	Black
Ethernet LAN (RJ-45) ports	1
Display viewable area (HxV)	136 x 217 mm
Power supply type	DC
Power consumption (standby)	4.5 W
Power consumption (typical)	7.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Wall mountable	No
HDMI ports quantity	0
Graphics card	AMX G4
Internal memory	512 MB
Internal memory type	DDR
RMS rated power	1.5 W