AMX NXA-WAP1000 Reference Guide

NXA-WAPZD1000 Smart Wireless Access Point
4
NXA-WAP1000 Smart Wireless Access Point
Reset Button
The Hard Reset button (FIG. 2) is used to restart the NXA-WAP1000 or to restore the factory default
configuration. If you hold down the button for less than 10 seconds, the AP will perform a hardware reset. If
you hold down the button for 10 seconds or more, any configuration changes you may have made are removed,
and the factory default configuration is restored to the AP.
Resetting the NXA-WAP1000 to factory default settings will erase all previously
configured settings.

AMX NXA-WAP1000 Specifications

General

Brand	AMX
Model	NXA-WAP1000
Category	Wireless Access Point
Language	English