Browser-Based Configuration Pages
42
NXA-WAP1000 Smart Wireless Access Point
Controlling Access to the Wireless Network
Access Controls give you control over which stations are allowed to join (associate with) your WLAN
networks. There are “tab” entries for each available WLAN.
Changing the Access Controls for a WLAN
1.
Go to Configuration > Radio 2.4G or Configuration > Radio 5G.
2. Click the Wireless # tab for the device for which you want to configure the access control settings.
3. Click the Edit Settings button after Access Control. The Configuration :: Wireless :: Access Control ::
Wireless # page appears (FIG. 26).
FIG. 26 Configuration - Radio 5G - Access Control
To Next Page
Loading...
