5.1.2 Front panel - Ref. QMX150
1 2 3 4 5 6
8 9 10
7
1. 4-line VFD
3. - access source 1 to 4
- access HDMI 1 or HDMI 2
- access SDI 1 to SDI 2
4. select the output #1 or #2, a layer and a source, then press TAKE.
This is a fast roung mode
5. Layer: - Black: clear the layer
-freeze/unfreeze the input selected in the currently selected layer
6. : allows to quickly display a foreground frame
7. : hold for 3 seconds for stand-by mode
8. Home menu or back one level - Enter: validate the menu or command
9. shorcut to transion menurecall a custom stored preset
10. TAKE: transion the pre-selected sources onto the Program output with the selected eects
To Next Page
Loading...
