Analytik Jena SPECORD 50 PLUS User Manual

Introduction
6 Edition 03/2013 SPECORD PLUS
Safety notes are indicated by pictogaphs and signal words. The type and source of the
danger are stated together with notes on preventing the danger. The meaning of the picto-
graphs and signal words used is explained in the chapter "Safety notes".
The elements of the control and analysis software are indicated as follows:
 Program terms are identified with SMALL CAPS.
 Buttons are shown by square brackets (e.g. [OK] button)
 Menu items are divided by an upright line (e.g. FILE | OPEN).
1.3 Warranty and liability
The warranty duration and liability comply with the legal requirements and the provisions in
the general terms and conditions of Analytik Jena AG.
Deviations from the intended use described in this user manual result in limitations of war-
ranty and liability during a damage event. Damage to wearing parts and glass breakage are
not included in the warranty.
Warranty and liability claims are excluded for personal injury and property damage due to
one or several of the following causes:
 use of the SPECORD PLUS other than intended
 improper commissioning, operation and service of the device
 modifications of the equipment without prior consultation with Analytik Jena AG
 unauthorized intervention in the equipment
 operation of the device with faulty safety equipment
 use of other than original spare parts, wearing parts or consumables
 improper repairs
 faults due to the non-observance of this user manual

Analytik Jena SPECORD 50 PLUS Specifications

General

Brand	Analytik Jena
Model	SPECORD 50 PLUS
Category	Measuring Instruments
Language	English