Safety instructions
SPECORD PLUS Edition 03/2013 7
2 Safety instructions
2.1 General notes
For your own safety and for a trouble-free operation carefully read this chapter before com-
missioning the SPECORD PLUS.
Comply with all safety instructions in the manual and pay careful attention to all messages
and notes which are displayed on the screen by the control software.
Also observe the safety instructions for system components by other manufacturers supplied
with this device (e.g. PC, printer, autosampler). The safety instructions on the labels and the
information on handling, storage and disposal of the reagents, reaction cells and packing
labels of the test kits must also be particularly observed.
Besides the safety instructions in this user manual and the local safety regulations that apply
to the operation of the device the general applicable regulations regarding accident preven-
tion, occupational health and safety and environmental protection have to be observed and
complied with.
References to potential dangers do not replace the work protection regulations which must
be observed.
2.2 Symbols and signal words used in the user manual
The user manual uses the following symbols and signal words to indicate hazards or instruc-
tions. The safety instructions are always placed before an action.
WARNING
Indicates a potentially hazardous situation.
If it is not prevented death or most serious injuries (incapacitation) can result.
CAUTION
Indicates a potentially hazardous situation.
If it is not prevented light or minor injuries and material damage can result.
CAUTION
Indicates a potentially hazardous situation.
Unless avoided, the product or items in its vicinity may be damaged.
IMPORTANT
Indicates application hints and other especially useful information without any resulting haz-
ardous or damaging situations.
To Next Page
Loading...
Need help?
General
