Andover Controls ACX 780 - Page 6

vi Andover Controls Corporation
Figures
Figure 1. Dimensions/Location of Mounting Holes and Knockouts in
Cabinet, in inches (mm).......................................................................................11
Figure 2. Inside the ACX 780/781...............................................................................13
Figure 3. Metal Plate and Screw for Power Supply Wire...........................................14
Figure 4. Infinet Cable Wiring....................................................................................15
Figure 5. Attaching the Infinet Cable to Infinity CX 9000 or 9200 ............................16
Figure 6. Normally Closed Supervisory Inputs ..........................................................20
Figure 7. Normally Open Supervisory Inputs.............................................................21
Figure 8. Wiring Ordinary Switch to DoorSwitch Input ............................................22
Figure 9. Wiring Switch with Built-in Resistor to DoorSwitch Input ........................23
Figure 10. Functioning of DoorSwitch Input Wired to
Supervisory Input.................................................................................................24
Figure 11. Functioning of Passive Infrared (PIR) Motion Detector Switch
Wired to Supervisory Input..................................................................................25
Figure 12. Wiring Diagram for Counter or Digital Input ...........................................26
Figure 13. Connections Between Card Reader and Controller...................................27
Figure 14. Wiring Wiegand Card Reader (Sensor Engineering) to
Controller........................................................................................................................28
Figure 15. Connections Between Card Reader and Controller...................................29
Figure 16. Wiring Proximity Wiegand Card Reader to Controller,
with 12 VDC Power Supply ................................................................................30
Figure 17. Connections Between Card Reader and Controller...................................31
Figure 18. Wiring Dorado ABA Card Reader to Controller.......................................32
Figure 19. Wiring Diagram for DOOR and AUX Form C Outputs
if Normally Open.................................................................................................35
Figure 20. Wiring Diagram for DOOR and AUX Form C Outputs
if Normally Closed...............................................................................................36
Figure 21. Power Supply Status Display ....................................................................38
Figure 22. Status Lights on Front Door of Cabinet Provided .....................................38
Figure 23. Location of Override and Status Lights ....................................................40
Tables
Table 1. Maximum Length Wire for Card Readers......................................................6
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com